|
| | Downgraded
Panels for Cold rooms
or Food-alimentary white rooms
1 -
NEW sandwich panels
2 - Downgraded 1st Choice panels
3 - Ordinary Downgraded panels
4 - Low class Downgraded panels
5-Transport
6- Borne Standards & Weight
Insulation Boards new-declasse
(Even with their original protective film)
With injected polyuréthane foam between 2 sheet steel. "Said sandwich
panels"
The plate is generally low ribbed,
For a better panel rigidity
We supply cut to the height of your walls,
The ceiling coming generally rely on it.
|
|
1)
NEW
sandwich panels |
|
|
These
panels are new, panels 1m wide. They arrive to us in
13.50 m rods,
we cut to your size (depending on your plans)
The panels 30 and
40 mm
are used to double the existing walls, we offer as standard
The panels 60 and
80 mm
serve as a bulkhead wall or cold room or for any other use.
(2 faces painted white).
M1 can be provided with a financial surcharge depending on the quantity
(attention minimum quantity of
300 square metres
).
I 
|
|
|
2)
1rst Choice downgraded Insulating panel |
|
|
Insulated
sandwich panel "downgraded 1st Choice" from 50 to 140mm thick,
Still with their original protective film width of 1.15m.
They
were downgraded for mistakes cutting, customers cancelled orders
or for color shade problems, see slight scratches.
We cut to your size, thereby making a new cold room.
The roof panels can be auto-bearing layers using superior. (See table
standard).
Width panels:
1.15 m
The majority are: 1 face painted white hot galvanized 1 side.
But we also 2 white faces.
Available lengths of up to
6 m
Image
carved out of a lot, ready to start
Various sockets:
Types
of ribs:
These veins print a rise of half a millimeter every
5 cm
.
this rise is smoothed by a slope in a raid at an angle.
So much so that these panels are regarded as "smooth and
washable"
as requested by the veterinary services "
 
Freezing
panels
12 to
20 cm
thick Cuts shifted to avoid thermal bridges
(you have cut them as mounting with a circular saw)
Special roofing panels
according to our stock (see colors and thicknesses)
Smoth
panels,
or stainless steel, depending on the available arrivals
|
|
|
3)
ORDINAIRE downgrated insulating pannels |
|
|
These
are the same signs as above, however, they may have minor defects.
These panels are used to set health standards at (veterinary approvals)
They sometimes scratched their plastic films or films are too well
dressed.
But they never shocks or holes, they have never been mounted.
They include some holes in the foam,
which in no way adversely affecting the ability of insulation.
(PS: an air immobile, as in the double glazing,
is also that of the insulating polyurethane foam)
In
downgraded ORDINARY, if one side is white, the other can be any
color.
(Galva or otherwise)
|
|
|
4)
Last quality of Downgraded insulating panels |
|
|
Generally
good for being re-painted
|
|
|
5 )
Transport |
We
do ourselves deliveries
On the West, North-France and Paris.
By
Transport companies for England, Europe and Africa
|
|
6)
Brought of panels and weight - Standard Table. |
(Without external load, under the action of their own weight, and wind
...)
Maximum range (m) allowable under the action of a pressure support panels
against their supports for different thicknesses of panels (mm) depending
on the number of supporters.
values for support at
each end, without support in the middle
|
panel
thickness
(mm)
|
30
|
40
|
50
|
60
|
80
|
100
|
120
|
140
|
160
|
180/200
|
|
Brought
for wall
panels
( m)
|
2.90
|
3.30
|
3.90
|
4.50
|
5.10
|
6.60
|
7.50
|
8.60
|
9.20
|
9.50
|
|
Brought
for roof
panels
(en m)
|
4.30
|
4.50
|
4.70
|
5.10
|
5.60
|
6.90
|
|
|
|
|
Pannels weight
|
thickness mm
|
30
|
40
|
50
|
60
|
80
|
100weight
|
|
weight kg/m²
|
10.6
|
11
|
11.4
|
11.8
|
12.6
|
13.4
|
|
thickness mm
|
120
|
140
|
160
|
180
|
200
|
|
|
weight kg/m²
|
14.2
|
15
|
15.8
|
16.6
|
17.4
|
|
|
